aquarium table lamp
by：Yufengling
2020-06-20
The table lamp of the Aquarium likes to see fish in the aquarium?
Why not approach the aquarium like the lights on the table?
This desk lamp uses 1-
A small one-gallon aquarium with an air pump.
Gravel filters, heaters and dedicated 5-watt fluorescent lamps for storage tanks.
The desk lamp has a single switch medium-
Lamp holder (
There are a lot of words for \"normal\" lamp sockets)
Top and tip-
If something unimaginable happens and the lights are knocked down, it will leave everything alive ---
No water and electricity mix here!
The main lamp holder and Fish Tank lamp can be independently controlled.
The fish cylinder lamp can even be turned on as a \"Night Light.
The main lamp socket is a pusher.
Through the switch type, the 5 w fluorescent lamp above the fish tank has a low twist switch on the back of the base.
As long as the desk lamp is plugged in, the air pump and heater can work continuously.
Because the fish tank has a heater, the aquarium can be used for tropical fish
Neon Tetris is great in this tank!
The lights are built by stacking parts onto the central spindle (
IP size of 1/8
Threaded pipe, the type used to make lamps and lanterns! )
Mounted on the base.
The base contains gas pumps and ballasts for 5 w fluorescent tank lamps.
There\'s also a tip at the base-
Switching and input-
Fuse to ensure product safety.
The base is closed in length of 6 \"dia.
Create the acrylic tube of the walls of the base part.
The tank is stacked on top of the base.
The tank has a central open channel.
Through pipes and air pipes, the length of the tank is extended from the bottom to the top through water.
The central open tube allows the tank to slide down on the central spindle.
The air pipe transports the air from the air pump under the tank above the water level so that if the pump stops, it will not leak water.
There is a clear acrylic box cover that slides onto the tank and is secured in place with nylon machine screws.
The tank top cover has two feed \"doors\", one in front and one in the back, depending on which one you want to use.
The top of the lamp is fitted with a 5 w fluorescent tube and a 120VAC socket for insertion into the water tank heater.
The acrylic cap that can be completely removed covers the top portion of the tank.
The lid has a feeding hole that can be aligned with the front or rear feed port in the tank cover.
The lamp socket is just the standard switch variety on the top.
You can use up to 100 W tubes, but save energy with LED or spiral fluorescent lamps!
Material: plastic ABS: 12 \"x 12\" by 1/4 \"thick black ABS sheet for bottom with textured acrylic on top surface: 16 inch \"diameter 1/8\" wall tube 12 inch 5/8 \"diameter month\" diameter 1/8 \"wall tube3 tube 2 inch month\" 12 Inch \"diameter tube 1/4 \"(or 3/16”)
Tube4-cub \"cube 3-1\" x6 \"thick\" thick sheet3-7 \"x7\" 1/8 \"thick sheet1-3\" x3 \"1/8\" thick sheet miscellaneous pieces,
Specified or similar;
All rated 120VAC or higher)
Mini Aquarium air pump model elite799 simple choke ballast 4-6-
8 W Valmont electric model 89G489 (two wire)Cherry spring-
Double-throw tamper-proof switch (
Single vote will also work)6’ 18/2 (18 AWG)SPT-
2 power cables with plugs (
Extension cord can be used)4’ 18/2 (18 AWG)SPT-
1 power cord-on Crimp-
Connect to the terminal of tip-Docking by switch
End joint curl
Terminal media-
Base Edison light socket with push-in switch, Silver5-watt two-
Pin fluorescent tube-
Hole mounting twist switch fuse holder with 2A insulation-
SPT through the ear-
1 wire tapesolderhard16-
1/2 of all threaded pipes 3-1/8 IP\"
Nuts for 1/8 IP pipe floor flange fittings (plumbing)
Thread adapter: thread 1/8 IP for floor Flange6 \"x6\" 12 specification frame fit (sheet metal)
18 \"various mounting screws and nutsmiscellaneous lampshade in diameter 12.
5 \"high 10\" two-piece lamp harp, feel silver or paint silver at 2 inch of 0.
18 \"aluminum pipe (
3/16 \"acrylic tube if not used)
Aquarium Silicon compatible with sealantAquarium air tubbing2-
Brass Airlines
12 \"x3\" miscellaneous wire/zipper ties3-nylon machine screw
Every day of the year, there is some city or town in the world that is changing over to for custom workout clothes.
Dongguan Yufenglin Garment Co., Ltd. is a reliable company that offers wonderful . In addition, the company also provides related components to make it more efficient. To know more, go to Yufenglin Garment.
custom workout clothes has become a serious problem for an increasing number of people around the world, that's why highly effective are developed by Dongguan Yufenglin Garment Co., Ltd..
Why not approach the aquarium like the lights on the table?
This desk lamp uses 1-
A small one-gallon aquarium with an air pump.
Gravel filters, heaters and dedicated 5-watt fluorescent lamps for storage tanks.
The desk lamp has a single switch medium-
Lamp holder (
There are a lot of words for \"normal\" lamp sockets)
Top and tip-
If something unimaginable happens and the lights are knocked down, it will leave everything alive ---
No water and electricity mix here!
The main lamp holder and Fish Tank lamp can be independently controlled.
The fish cylinder lamp can even be turned on as a \"Night Light.
The main lamp socket is a pusher.
Through the switch type, the 5 w fluorescent lamp above the fish tank has a low twist switch on the back of the base.
As long as the desk lamp is plugged in, the air pump and heater can work continuously.
Because the fish tank has a heater, the aquarium can be used for tropical fish
Neon Tetris is great in this tank!
The lights are built by stacking parts onto the central spindle (
IP size of 1/8
Threaded pipe, the type used to make lamps and lanterns! )
Mounted on the base.
The base contains gas pumps and ballasts for 5 w fluorescent tank lamps.
There\'s also a tip at the base-
Switching and input-
Fuse to ensure product safety.
The base is closed in length of 6 \"dia.
Create the acrylic tube of the walls of the base part.
The tank is stacked on top of the base.
The tank has a central open channel.
Through pipes and air pipes, the length of the tank is extended from the bottom to the top through water.
The central open tube allows the tank to slide down on the central spindle.
The air pipe transports the air from the air pump under the tank above the water level so that if the pump stops, it will not leak water.
There is a clear acrylic box cover that slides onto the tank and is secured in place with nylon machine screws.
The tank top cover has two feed \"doors\", one in front and one in the back, depending on which one you want to use.
The top of the lamp is fitted with a 5 w fluorescent tube and a 120VAC socket for insertion into the water tank heater.
The acrylic cap that can be completely removed covers the top portion of the tank.
The lid has a feeding hole that can be aligned with the front or rear feed port in the tank cover.
The lamp socket is just the standard switch variety on the top.
You can use up to 100 W tubes, but save energy with LED or spiral fluorescent lamps!
Material: plastic ABS: 12 \"x 12\" by 1/4 \"thick black ABS sheet for bottom with textured acrylic on top surface: 16 inch \"diameter 1/8\" wall tube 12 inch 5/8 \"diameter month\" diameter 1/8 \"wall tube3 tube 2 inch month\" 12 Inch \"diameter tube 1/4 \"(or 3/16”)
Tube4-cub \"cube 3-1\" x6 \"thick\" thick sheet3-7 \"x7\" 1/8 \"thick sheet1-3\" x3 \"1/8\" thick sheet miscellaneous pieces,
Specified or similar;
All rated 120VAC or higher)
Mini Aquarium air pump model elite799 simple choke ballast 4-6-
8 W Valmont electric model 89G489 (two wire)Cherry spring-
Double-throw tamper-proof switch (
Single vote will also work)6’ 18/2 (18 AWG)SPT-
2 power cables with plugs (
Extension cord can be used)4’ 18/2 (18 AWG)SPT-
1 power cord-on Crimp-
Connect to the terminal of tip-Docking by switch
End joint curl
Terminal media-
Base Edison light socket with push-in switch, Silver5-watt two-
Pin fluorescent tube-
Hole mounting twist switch fuse holder with 2A insulation-
SPT through the ear-
1 wire tapesolderhard16-
1/2 of all threaded pipes 3-1/8 IP\"
Nuts for 1/8 IP pipe floor flange fittings (plumbing)
Thread adapter: thread 1/8 IP for floor Flange6 \"x6\" 12 specification frame fit (sheet metal)
18 \"various mounting screws and nutsmiscellaneous lampshade in diameter 12.
5 \"high 10\" two-piece lamp harp, feel silver or paint silver at 2 inch of 0.
18 \"aluminum pipe (
3/16 \"acrylic tube if not used)
Aquarium Silicon compatible with sealantAquarium air tubbing2-
Brass Airlines
12 \"x3\" miscellaneous wire/zipper ties3-nylon machine screw
Every day of the year, there is some city or town in the world that is changing over to for custom workout clothes.
Dongguan Yufenglin Garment Co., Ltd. is a reliable company that offers wonderful . In addition, the company also provides related components to make it more efficient. To know more, go to Yufenglin Garment.
custom workout clothes has become a serious problem for an increasing number of people around the world, that's why highly effective are developed by Dongguan Yufenglin Garment Co., Ltd..
