Latest products
counter strike game player assault hoodie
by：Yufengling
2020-06-13
Yes, this Christmas gift was made for the same child with TARDIS bookcase and Halo M5AB rifle props.
It seems his recent interest is computer game counter-attack, always hoping to get some steam points in app purchase.
Anyway, inspired by the anti-terrorism elite team: Global Offensive, I made this fan hoodie for my nephew to wear when playing games or performing real aerial missions, yes, he likes it too.
Turn an ordinary black hoodie into something awesome.
Note: copying any registered trademark, logo, artwork or using an actual law enforcement identity does not mean authorizing the use or copying of any registered trademark, logo, artwork, or the use of an actual law enforcement identification. Clear?
This is an opportunity to try my new silhouette Cameo cutter.
For the one I sniped on 3 Bay to get a lot of stuff, \"Joesonghamnida, joesonghamnida. . .
\"The actual surplus of Germany\'s polizawa also came from another transaction.
This machine is able to cut vinyl templates from any design you create and create iron when transferring.
The basic software that comes with the machine allows you to track images automatically and easily to form a cut template of the shape.
The only obstacle to learning how to use it is that when you load the cutting pad, mark the alignment with a small indicator near the tool adjustment tool holder, and the upper edge of the cutting pad should be exactly opposite the two feed rollers, make sure the indicator point is next to the load cutting pad in the display and click the ENTER button.
The machine should grab the cutting pad and then give it in to the start position within a few inches.
You can then start cutting by clicking the button in the software.
Never mentioned in the manual or picture, you should click the enter button to load the mat after positioning it.
I gave it a couple of attempts to start cutting with a cutting pad placed on the knife bed, but I was wondering why the mat could not feed in straight lines, and all the cuts are printed with a pattern on the outside of the knife bed.
Maybe sugru has a left mat guide and a better tool rack.
It\'s time to buy a new cutting pad, and in retaliation for other artisans I did get a very, very good deal. . .
Once the design is mirrored and cut on the heat transfer material, you have to throw away the parts you don\'t want to stick to the hoodie or transfer to the hoodie.
Picking out the parts to be discarded is called \"reject Design \".
\"I just used a small tool knife to pick up and peel off the excess heat transfer vinyl.
To make sure all the parts are cut off cleanly, you have to try and cut them.
The bottom of my patch is black canvas fabric.
It\'s been a while, so I gave it a layer of iron.
Harden it on the interface.
I have a spare iron for all my hot glue/laminate.
Place it in a high/cotton environment and use a piece of parchment paper as an extra precaution to prevent things from sticking together and making a mess.
Press heat for about 30 seconds and move a little.
The plastic carrier layer looks distorted by heat.
This is actually a good indication that it gets enough heat.
Now wait for it to cool before you try to peel off the carrier plastic.
If it does not fall off cleanly, it may take more heating time.
After the carrier pulls it down, you can cover the design with a piece of parchment paper and press it again to make sure the design is well combined with the fabric.
I ironed my back and added some heat to it.
If you double check, the heat transfer will melt into your fabric texture.
I flattened all the sides.
I then trimmed the corners and trimmed the excess so there was a flat folded edge around me.
I used another piece of iron on the interface to seal the entire patch and fix the fold to the edge.
This is easier to complete the original edge of the patch than trying to simulate the embroidery edge of the traditional patch.
The next step is to cut off the velcro backing for each patch.
I applied the hook/plastic part to the patch.
Cut velcro close to the patch shape.
If the velcro band is not wide enough to cover the patch, you can sew the smaller width bars together.
Stitch around the boundary with closed and wide glyphs to connect velcro.
Place the corresponding ring/blur velcro on the hoodie.
Stitched in tight and wide glyphs.
You may want to sew a line in the inner part of velcro to prevent the tension of the patch.
In fact, it is pronounced \"Molly \".
This is the strap system and configuration used by the military to connect optional accessories (such as bags) to the main equipment, and in our case the hoodie is our tactical vest.
I bought two small accessory bags with MOLLE mounting system inside.
Because this is from * bay (cheep)
Looks like the tactics are good, but not really.
Construction specifications.
All I need to do is create a matching installation network grid on the hoodie.
The straps on the back of the bag are woven through the straps to secure the bag in place.
The ends of the mounting straps have snap-ins to keep them in place.
I used 1 inch nylon straps.
Fusion the end fibers by baking in the flame for a period of time, sealing the cutting end.
Hot nylon is like lava, so be careful and let it cool completely.
You need the position of the strap, a row above the pocket and a row in the middle of the pocket.
I nailed it in a few places so that the bag strap could go through and support the weight.
Due to the small opening of the hand pocket, it was difficult to sew the straps in place and I had to collect all the fabric around me and only sew on the face layer.
I won\'t take the hoodie apart so I can have a flat open face to work.
Attach the pouch by alternating weave mounting straps, and the mounting straps are located on the back of the inlet and outlet rings on the hoodie and pouch.
You can see how your patch is installed on their velcro. . . patches.
This is a completed assault hoodie for counter-terrorism tactics.
Is anyone on duty?
If you have a custom workout clothes business, be sure to choose a from Dongguan Yufenglin Garment Co., Ltd.. After all, you need quality equipment in order to provide your customers with quality service.
What are you waiting for? Get out there and buy some of the most effective at Yufenglin Garment.
The first machine to produce custom workout clothes, the custom workout clothes custom workout gear was invented in custom workout clothes in custom workout clothes by custom workout clothes and was subsequently improved.
Dongguan Yufenglin Garment Co., Ltd. can reassign work or shuffle around assigned tasks if one team member is overwhelmed while others are not, more effectively managing resources on the fly. With detailed overviews and reports, manufacturers also can more easily stay abreast of new developments.
give you an additional custom workout clothes option for your custom workout clothes, whether it being a custom workout clothes, custom workout clothes or custom workout clothes. Go and get more info at Yufenglin Garment.
It seems his recent interest is computer game counter-attack, always hoping to get some steam points in app purchase.
Anyway, inspired by the anti-terrorism elite team: Global Offensive, I made this fan hoodie for my nephew to wear when playing games or performing real aerial missions, yes, he likes it too.
Turn an ordinary black hoodie into something awesome.
Note: copying any registered trademark, logo, artwork or using an actual law enforcement identity does not mean authorizing the use or copying of any registered trademark, logo, artwork, or the use of an actual law enforcement identification. Clear?
This is an opportunity to try my new silhouette Cameo cutter.
For the one I sniped on 3 Bay to get a lot of stuff, \"Joesonghamnida, joesonghamnida. . .
\"The actual surplus of Germany\'s polizawa also came from another transaction.
This machine is able to cut vinyl templates from any design you create and create iron when transferring.
The basic software that comes with the machine allows you to track images automatically and easily to form a cut template of the shape.
The only obstacle to learning how to use it is that when you load the cutting pad, mark the alignment with a small indicator near the tool adjustment tool holder, and the upper edge of the cutting pad should be exactly opposite the two feed rollers, make sure the indicator point is next to the load cutting pad in the display and click the ENTER button.
The machine should grab the cutting pad and then give it in to the start position within a few inches.
You can then start cutting by clicking the button in the software.
Never mentioned in the manual or picture, you should click the enter button to load the mat after positioning it.
I gave it a couple of attempts to start cutting with a cutting pad placed on the knife bed, but I was wondering why the mat could not feed in straight lines, and all the cuts are printed with a pattern on the outside of the knife bed.
Maybe sugru has a left mat guide and a better tool rack.
It\'s time to buy a new cutting pad, and in retaliation for other artisans I did get a very, very good deal. . .
Once the design is mirrored and cut on the heat transfer material, you have to throw away the parts you don\'t want to stick to the hoodie or transfer to the hoodie.
Picking out the parts to be discarded is called \"reject Design \".
\"I just used a small tool knife to pick up and peel off the excess heat transfer vinyl.
To make sure all the parts are cut off cleanly, you have to try and cut them.
The bottom of my patch is black canvas fabric.
It\'s been a while, so I gave it a layer of iron.
Harden it on the interface.
I have a spare iron for all my hot glue/laminate.
Place it in a high/cotton environment and use a piece of parchment paper as an extra precaution to prevent things from sticking together and making a mess.
Press heat for about 30 seconds and move a little.
The plastic carrier layer looks distorted by heat.
This is actually a good indication that it gets enough heat.
Now wait for it to cool before you try to peel off the carrier plastic.
If it does not fall off cleanly, it may take more heating time.
After the carrier pulls it down, you can cover the design with a piece of parchment paper and press it again to make sure the design is well combined with the fabric.
I ironed my back and added some heat to it.
If you double check, the heat transfer will melt into your fabric texture.
I flattened all the sides.
I then trimmed the corners and trimmed the excess so there was a flat folded edge around me.
I used another piece of iron on the interface to seal the entire patch and fix the fold to the edge.
This is easier to complete the original edge of the patch than trying to simulate the embroidery edge of the traditional patch.
The next step is to cut off the velcro backing for each patch.
I applied the hook/plastic part to the patch.
Cut velcro close to the patch shape.
If the velcro band is not wide enough to cover the patch, you can sew the smaller width bars together.
Stitch around the boundary with closed and wide glyphs to connect velcro.
Place the corresponding ring/blur velcro on the hoodie.
Stitched in tight and wide glyphs.
You may want to sew a line in the inner part of velcro to prevent the tension of the patch.
In fact, it is pronounced \"Molly \".
This is the strap system and configuration used by the military to connect optional accessories (such as bags) to the main equipment, and in our case the hoodie is our tactical vest.
I bought two small accessory bags with MOLLE mounting system inside.
Because this is from * bay (cheep)
Looks like the tactics are good, but not really.
Construction specifications.
All I need to do is create a matching installation network grid on the hoodie.
The straps on the back of the bag are woven through the straps to secure the bag in place.
The ends of the mounting straps have snap-ins to keep them in place.
I used 1 inch nylon straps.
Fusion the end fibers by baking in the flame for a period of time, sealing the cutting end.
Hot nylon is like lava, so be careful and let it cool completely.
You need the position of the strap, a row above the pocket and a row in the middle of the pocket.
I nailed it in a few places so that the bag strap could go through and support the weight.
Due to the small opening of the hand pocket, it was difficult to sew the straps in place and I had to collect all the fabric around me and only sew on the face layer.
I won\'t take the hoodie apart so I can have a flat open face to work.
Attach the pouch by alternating weave mounting straps, and the mounting straps are located on the back of the inlet and outlet rings on the hoodie and pouch.
You can see how your patch is installed on their velcro. . . patches.
This is a completed assault hoodie for counter-terrorism tactics.
Is anyone on duty?
If you have a custom workout clothes business, be sure to choose a from Dongguan Yufenglin Garment Co., Ltd.. After all, you need quality equipment in order to provide your customers with quality service.
What are you waiting for? Get out there and buy some of the most effective at Yufenglin Garment.
The first machine to produce custom workout clothes, the custom workout clothes custom workout gear was invented in custom workout clothes in custom workout clothes by custom workout clothes and was subsequently improved.
Dongguan Yufenglin Garment Co., Ltd. can reassign work or shuffle around assigned tasks if one team member is overwhelmed while others are not, more effectively managing resources on the fly. With detailed overviews and reports, manufacturers also can more easily stay abreast of new developments.
give you an additional custom workout clothes option for your custom workout clothes, whether it being a custom workout clothes, custom workout clothes or custom workout clothes. Go and get more info at Yufenglin Garment.
