How to Choose Men's Gym Shorts
Going to the gym for regular workouts entail choosing the right sort of clothes. Whether you are a new joiner or a veteran in working out, buying the right gym shorts can be a challenge.
nasa t-shirt to tank top transformation!
by：Yufengling
2020-06-25
You need your newspaper, scissors, ruler and favorite vest for this step!
First arrange your tank top in the newspaper, arrange the edge of the newspaper with the center front or back of the tank top.
Traces around the tank (figure 1).
By measuring the unstretched chest, waist, and hem ring at the top of the tank and matching it with the pattern measurement, check again that the measurement is at least in the correct ballpark. (
It was the first time I went wrong, believe me it was great not to take everything apart so measure twice and cut once! )
Use a curved ruler to smooth the curve of the garment
In this case, all seams have a slight curve except the shoulder seam, and then cut the case (figure 2).
If you plan to add a shelf bra, copy the original front and back pattern to a new newspaper and then cut the torso to the correct length to check your chest.
Make sure to add an extra 1 \"to the length of the elastic housing \"!
Since I know I want a contrasting material, I draw some lines on the front and back patterns where I want stitches, separate them and add the seam allowance (
I usually add 5/8 \").
Since we are finishing the neckline and sleeve holes with binding material, do not add seam allowance there.
Otherwise, add sewing allowance and hem allowance.
First of all, I would suggest cutting off the sleeves and it would be easier to do so.
Show your pattern on the fabric
You may have to be creative to make them all fit into the fabric, so take a moment.
In this case, I\'m only in t-shirt fabric (figure 1)
Also, I used the back of the internal bra (figure 2).
I eventually need to cut off the NASA logo and decals.
Print it on the front of the shirt later. Fold the t-
To get a nice center front fold, put the pattern on it and cut it off, the shirt fits.
Cut the remaining parts using secondary fabric, including some parts with a length of 1. 75\" binding.
For binding, if stretch material is used, it can be cut on longitudinal or lateral texture
I recommend grains with less elasticity, but both work.
If for some reason you are using right and wrong
Stretch the material, cut it off according to the deviation, otherwise you will have problems later.
The next major steps include many small steps.
Sew the shirt together
I would suggest sewing the logo on the front first, as it is easiest to bypass interesting shapes before putting the whole shirt together.
Sew the contrast band on top, then side slip, shoulder seam, and then the hem.
In this order, things will go more smoothly.
I chose to sew the seam on the front and back twice as the double seam is a movementwear marker.
You can use double.
The needle attachment, but I didn\'t, so I only sewed it twice.
I finished all the seams that were not stitched with overlocker.
If you do not have overlocker, I would suggest stitching the seam allowance with a saw and then cutting the seam allowance with a needle cut.
Next, create an internal bra and do it by creating an elastic shell-
Just flip over the hem area, stitch it down, and then pass the elasticity through.
Connect the wrong sides, connect the bra part inside the shirt part, and nail the two pieces together.
Now the binding is over.
Combine the right side together and place deviations along the curve of the neck and sleeve holes.
Stitch it down with a seam allowance of about 3/8.
Turn the binding to the seam and press it.
Next, fold the binding up and down on the wrong side of the garment, leaving enough length so that the folding covers the suit line there.
The needle, then sew the bound place.
I doubled the stitches again.
For a more intuitive reference, this woman explains the process here: much better than me!
With it, you have finished making the shirt!
Only wear it!
My sport is cycling, so one day I went out by bike!
Enjoy your new tank top! (
There are more pictures here, all provided by Stephanie Ruby)
are present in just about every facet of modern life.
should only be created by the very best custom workout gear companies with the training, experience and know how about what is expected of them.
High-quality products are huge boosts when it comes to marketing ideas; allowing potential manufacturers to place themselves in the shoes of a satisfied customer brings them one step closer to understanding the idea of custom workout gear.
custom workout clothes custom workout gear is one of the most commonly used tool for custom workout clothes.
custom workout gear, is an alternative product for custom workout clothes to investors and consumers who are passionate about our products or services.
First arrange your tank top in the newspaper, arrange the edge of the newspaper with the center front or back of the tank top.
Traces around the tank (figure 1).
By measuring the unstretched chest, waist, and hem ring at the top of the tank and matching it with the pattern measurement, check again that the measurement is at least in the correct ballpark. (
It was the first time I went wrong, believe me it was great not to take everything apart so measure twice and cut once! )
Use a curved ruler to smooth the curve of the garment
In this case, all seams have a slight curve except the shoulder seam, and then cut the case (figure 2).
If you plan to add a shelf bra, copy the original front and back pattern to a new newspaper and then cut the torso to the correct length to check your chest.
Make sure to add an extra 1 \"to the length of the elastic housing \"!
Since I know I want a contrasting material, I draw some lines on the front and back patterns where I want stitches, separate them and add the seam allowance (
I usually add 5/8 \").
Since we are finishing the neckline and sleeve holes with binding material, do not add seam allowance there.
Otherwise, add sewing allowance and hem allowance.
First of all, I would suggest cutting off the sleeves and it would be easier to do so.
Show your pattern on the fabric
You may have to be creative to make them all fit into the fabric, so take a moment.
In this case, I\'m only in t-shirt fabric (figure 1)
Also, I used the back of the internal bra (figure 2).
I eventually need to cut off the NASA logo and decals.
Print it on the front of the shirt later. Fold the t-
To get a nice center front fold, put the pattern on it and cut it off, the shirt fits.
Cut the remaining parts using secondary fabric, including some parts with a length of 1. 75\" binding.
For binding, if stretch material is used, it can be cut on longitudinal or lateral texture
I recommend grains with less elasticity, but both work.
If for some reason you are using right and wrong
Stretch the material, cut it off according to the deviation, otherwise you will have problems later.
The next major steps include many small steps.
Sew the shirt together
I would suggest sewing the logo on the front first, as it is easiest to bypass interesting shapes before putting the whole shirt together.
Sew the contrast band on top, then side slip, shoulder seam, and then the hem.
In this order, things will go more smoothly.
I chose to sew the seam on the front and back twice as the double seam is a movementwear marker.
You can use double.
The needle attachment, but I didn\'t, so I only sewed it twice.
I finished all the seams that were not stitched with overlocker.
If you do not have overlocker, I would suggest stitching the seam allowance with a saw and then cutting the seam allowance with a needle cut.
Next, create an internal bra and do it by creating an elastic shell-
Just flip over the hem area, stitch it down, and then pass the elasticity through.
Connect the wrong sides, connect the bra part inside the shirt part, and nail the two pieces together.
Now the binding is over.
Combine the right side together and place deviations along the curve of the neck and sleeve holes.
Stitch it down with a seam allowance of about 3/8.
Turn the binding to the seam and press it.
Next, fold the binding up and down on the wrong side of the garment, leaving enough length so that the folding covers the suit line there.
The needle, then sew the bound place.
I doubled the stitches again.
For a more intuitive reference, this woman explains the process here: much better than me!
With it, you have finished making the shirt!
Only wear it!
My sport is cycling, so one day I went out by bike!
Enjoy your new tank top! (
There are more pictures here, all provided by Stephanie Ruby)
are present in just about every facet of modern life.
should only be created by the very best custom workout gear companies with the training, experience and know how about what is expected of them.
High-quality products are huge boosts when it comes to marketing ideas; allowing potential manufacturers to place themselves in the shoes of a satisfied customer brings them one step closer to understanding the idea of custom workout gear.
custom workout clothes custom workout gear is one of the most commonly used tool for custom workout clothes.
custom workout gear, is an alternative product for custom workout clothes to investors and consumers who are passionate about our products or services.
Related Products
